 |
RHT Series -40°F +500°F |
 |
|
|
 |
||||
|---|---|---|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
PB | BR | BT | C |
| 3" | 1-1/4” | 1/2” | 1-5/8” | 220 | 0.46 | RHT80 | |||
| 3" | 1-1/4” | 5/16” | 1-5/8” | 220 | 0.46 | RHT80BR | |||
| 3" | 1-1/4” | 3/8” | 1-3/4” | 220 | 0.46 | RHT80BT | |||
| 3" | 1-1/4” | S 6201 | 1-5/8” | 220 | 0.46 | RHT80S | |||
| 3" | 1-1/4” | 1/2” | 1-5/8” | 220 | 0.54 | RHT80C | |||
| 4" | 1-1/4” | 1/2” | 1-5/8” | 242 | 0.51 | RHT100 | |||
| 4" | 1-1/4” | 5/16” | 1-5/8” | 242 | 0.51 | RHT100BR | |||
| 4" | 1-1/4” | 3/8” | 1-3/4” | 242 | 0.51 | RHT100BT | |||
| 4" | 1-1/4” | S 6201 | 1-5/8” | 242 | 0.51 | RHT100S | |||
| 4" | 1-1/4” | 1/2” | 1-5/8” | 242 | 0.59 | RHT100C | |||
 |
PB | BR | BT | C | |||||
Hardness 70 Shore A |
 |
 |
 |
 |
|||||
| IMPORTANT NOTICE ! | |||||||||
| The performances, the life time and the load capacity of the DITHERM RHT series are strictly depending on heating and cooling cycles | |||||||||
| and cooling cycles to which the wheel is submitted. The maximum performance is guaranteed by the following standard: | |||||||||
| > cycles of maximum 30 minutes in temperature followed by 30 minutes cooling at room temperature < | |||||||||